Accreditation Body Number: PEC MECH/10569

Education

Year	Degree	University/Institute
2005	PhD Mechanical Engineering	NUST Islamabad, Pakistan
1992	MSc Mechanical Engineering	University of Engineering & Technology Lahore, Pakistan
1983	BSc Mechanical Engineering	University of Engineering & Technology Lahore, Pakistan

Research/Teaching Experience

Year	Position	University/Institute
2022-Present	Professor	Wah Engineering College, University of Wah Wah Cantt, Pakistan
2020-2021	Professor/ Dean	Wah Engineering College, University of Wah Wah cantt, Pakistan
2019-2020	Professor	NFC-IEFR (National Fertilizer Corporation Institute of Engineering and Fertilizer Research Faisalabad, Pakistan
2017-2018	Director Student affairs	University of Engineering & Technology (UET) Taxila, Pakistan
2016-2016	Experimental Study of Cross Flow induced vibration in Flexible Tube Bundle Postgraduate Faculty Research	University of Engineering & technology Taxila, Pakistan
2016-2016	Acting Director ORIC	University of Engineering & Technology Taxila, Pakistan
2014-2019	Dean Faculty of Mechanical & Aeronautical Engineering	University of Engineering & Technology (UET) Taxila, Pakistan
2013-2013	Up-gradation of test rig for further investigation into cross flow induced-vibration in tube bundles through addition of flow test loop, Postgraduate faculty research grants proposals	UET Taxila, Pakistan
2012-2012	Chairman Central Purchase Committee	University of Engineering & Technology Taxila, Pakistan
2011-2011	Investigation of Flow Induced Vibration in Shell & Tube Heat Exchanger Funded by HEC/UET	UET Taxila Taxila, Pakistan
2011-2011	Designing, Development and Manufacturing of apparatus for the analysis of fretting fatigue produced in the dove tail joint of Disc and blades of aero engine Funded by HEC/UET	University of Engineering & Technology Taxila, Pakistan
2011-2012	Designing Development and Manufacturing of Apparatus to Predict Probable/Plausible Sites of Fretting Fatigue Cracking in Axial Dove Tail Joint of Disc and Blades of an Aero Engine	University of Engineering & Technology Taxila, Pakistan
2011-2011	Flow Induced Vibration of Shell & Tube Heat Exchanger using Photo Elastic Analysis Funded by HEC/UET	University of Engineering & Technology Taxila, Pakistan
2011-2012	Further Investigation into Cross Flow Induced-Vibrations in Tube Bundles, Postgraduate Faculty Research	University of Engineering & Technology Taxila, Pakistan
2011-2019	Vice Presedent Alumni Association	University of engineering & technology (UET) Taxlia, Pakistan
2010-2012	Coordinator Industry-Academia Linkages	University of engineering & Technology (UET) Taxila, Pakistan
2010-2012	Chairman Affiliation Committee	University of Engineering & Technology Taxila, Pakistan
2010-2012	Dean Faculty of Industrial Engineering & Management Sciences (Look After)	University of Engineering & Technology (UET) Taxila, Pakistan
2010-2010	Chairman Industrial Engineering Department	University of Engineering & Technology Taxila, Pakistan
2009-2012	Dean Faculty of Mechanical & Aeronautical Engineering	University of Engineering & Technology Taxila, Pakistan
2009-2010	Acting Vice Chancellor	University of Engineering & Technology Taxlia, Pakistan
2007-2009	Chairman Mechanical Engg. Department	niversity of Engineering & Technology Taxila, Pakistan
2007-2010	Incharge Placement Cell	University of Engineering & Technology (UET) Taxila, Pakistan
2007-2019	Convener Project Purchase committee, Mechanical engineering Deptt	University of Engineering & Technology(UET) Taxila, Pakistan
2005-2005	Registrar (Founder)	University of Wah Wah Cantt, Pakistan
2004-2005	Principal (Founder)	Wah Engineering College, University of Wah Wah Cantt, Pakistan
1999-2019	Professor	University of Engineering & technology (UET) Taxila, Pakistan
1997-1999	Associate Professor	University of Engineering & Technology (UET) Taxila, Pakistan
1988-1997	Assistant Professor	University of Engineering & Technology Taxila & Lahore, Pakistan
1987-1988	Lecturer	University of Engineering & Technology Lahore (Taxila Campus), Pakistan
1983-1986	Assistant Mechanical Engineer	Pakistan Petroleum Limited Islamabad, Pakistan

Honors and Awards

Best Teacher Award by HEC, Islamabad, Pakistan, Year 2011
Best teacher Award by UGC, Islamabad, Pakistan, Year 2000
ASME ICONE-17 Track Co-Chair Award, Brussels, Belgium, Year 2009
ASME ICONE-16 Organizer Award, Florida USA, Year 2008
Fulbright Award by USA Govt, Year 2002-2003
Gold Medal for obtaining first position in the University by UET Lahore, Pakistan Year 1986
Gold Medal for obtaining first position in the University by PECO Lahore, Pakistan Year 1986
Gold Medal for obtaining first position in the University by Greaves & Cotton Lahore, Pakistan Year 1986
Quaid-e-Azam Merit Scholarship by Ministry of Education, Govt of Pakistan Year 1986

Professional Societies

Pakitan Engineering Council
Pakistan Standards & Quality Control Authority

List of Publications

Journal Publications

Muhammad Shahid Bashir, Shahab Khushnood, Luqman Ahmad Nizam, Muhammad Yasar Javaid, Muhammad Usman & Muhammad Mohsin Rashid, "Fretting Wear Analysis of Flexible Vibrating Tube Interacting with the Support Plate in Low-Speed Water Tunnel", Journal of Vibration Engineering & Technologies, Vol. 0, Issue No. 0, 2023. 2.7 (pp. 0-0) IF:2.7 Category: Y
DOI: https://doi.org/10.1007/s42417-023-00987-5 Keywords
SDG: 9-Industry, Innovation and Infrastructure
Download Link: Click Here
Ejaz Mahmood Shahid Chaudhry, Shahab Khushnood, Saad Ejaz, "Optimization of Methanol and Sodium Hydroxide used in the Production of Biodiesel using Jatropha Oil", University of Wah Journal of Science and Technology, Vol. 7, Issue No. 0, 2023. (pp. 0-0) Category: Y
SDG: 7-Affordable and Clean Energy
Download Link: Click Here
Akmal Hafeez , Shahab Khushnood, Luqman Ahmad Nizam, Muhammad Usman , Muhammad Mohsin Rashid , Hasan Farid Khan , Muhammad Ayub , Adeel Qadir, "Analysis of Flow-Induced Vibrations in a Heat Exchanger Tube Bundle Subjected to Variable Tube Flow Velocity", Advances in Science and Technology Research Journal (ASTRJ), Vol. 0, Issue No. 0, 2023. (pp. 0-0) Category: Y
DOI10.12913/22998624/161278
SDG: 9-Industry, Innovation and Infrastructure
Download Link: Click Here
Amna Adil, Taha Baig, Furqan Jamil, Muhammad Farhan, Muhammad Shehryar, Hafiz Muhammad Ali & Shahab Khushnood, "Nanoparticle-based cutting fluids in drilling: a recent review", The International Journal of Advanced Manufacturing Technology, Vol. 0, Issue No. 0, 2023. 3.226 (pp. 0-0) IF:3.226 Category: W
DOI: https://doi.org/10.1007/s00170-023-11048-2
SDG: 9-Industry, Innovation and Infrastructure
Luqman Ahmad Nizam, Shahab Khushnood, Muhammad Atif Niaz, Waqas Javid & Muhammad Ashraf Dogar, "Experimental Investigation of Flow-Induced Vibrations of the Finned Tubes in a Parallel Triangular Tube Array", Journal of Vibration Engineering Technology, Vol. 0, Issue No. 0, 2023. 2.7 (pp. 0-0) IF:2.7 Category: Y
DOI: https://doi.org/10.1007/s42417-023-01249-0
Download Link: Click Here
Malik Ijaz Hussain, Shahab Khushnood, "Studies on the effects of cryogenic cooling on microstructure and mechanical properties of plasma arc welde", Materials Research Express, Vol. 10, Issue No. 0, 2023. (pp. 0-0) Category: X
DOI10.1088/2053-1591/acbe27
SDG: 9-Industry, Innovation and Infrastructure
Download Link: Click Here
Ammar Naseer, Furqan Jamil, Hafiz Muhammad Ali, Ali Ejaz, Shahab Khushnood, Tehmina Ambreen, Muhammad Sajid Khan, Muhammad Ansar Bashir , William Pao I, Wei Mon Yan, "Role of phase change materials thickness for photovoltaic thermal management", Sustainable Energy Technologies and Assessments, Vol. 49, Issue No. 0, 2022. (pp. 0-0) Category: W
DOIhttps://doi.org/10.1016/j.seta.2021.101719
SDG: 7-Affordable and Clean Energy
Download Link: Click Here
Faisal Hassan, Furqan Jamil, Abid Hussain, Hafiz Ali, Muhammad Janjua Shahab Khushnood, Muhammad Farhan, Khurram, Altaf Zafar Said, Chang He Li, "Recent advancements in latent heat phase change materials and their applications for thermal energy storage and buildings: A state of the art review", Sustainable Energy Technologies and Assesments, Vol. 49, Issue No. 0, 2022. 8 (pp. 0-0) IF:8 Category: W
DOI: 10.1016/j.seta.2021.101646
SDG: 7-Affordable and Clean Energy
Download Link: Click Here
Ghulam Mustafa, Shahab Khushnood, "Early faults diagnosis and severity assessment of rolling element bearings on wireless signal transfer", Bulletin of Electrical Engineering and Information, Vol. 11, Issue No. 0, 2022. (pp. 221-230) Category: Y
DOIhttps://doi.org/10.11591/eei.v11i1
Download Link: Click Here
Furqan Jamil, Taha Baig, Hafiz Muhammad Ali, Muhammad Shehryar, Shahab Khushnood, Faisal Hassan, "Hybrid nanoFluids towards advancement in Nano Fluids for heat Sink", Advance in Nano Fluids Heat Transfer ( Elesine Book Chapter), Vol. 1, Issue No. 0, 2022. 0.572 (pp. 537-556) IF:0.572 Category: Other
DOI: https://doi.org/10.1016/B978-0-323-88656-7.00006-4
SDG: 3-Good Health and Well-being
Download Link: Click Here
Shahab Khushnood, "Holistic Intergration of counter flow indirct evaporative cooler with solar assisted desiccant cooling system", A Techo Ecnomic Evaluation , Vol. 0, Issue No. 0, 2021. (pp. 0-0)
Muhammad Ammar Akram, Shahab Khushnood, Syeda Laraib Tariq, Luqman Ahmad Nizam, Hafiz Muhammad Ali , "The Effect of Grid Generated Turbulence on the Fluidelastic Instability Response in Parallel Triangular Tube Array ", Annals of Nuclear Energy Elsvier , Vol. 158, Issue No. 0, 2021. (pp. 0-0)
Muhammad Shahid Bashir, Aizaz Kashif, Shahab Khushnood , "Vibration and Damping Analysis of Flexible Aluminum Tube under the variation of Support Plate Geometry using Low Speed Water Tunnel ", Ocean Engineering , Vol. 216, Issue No. 0, 2020. (pp. 0-0)
M Ammar Akram, Shahab Khushnood, Syeda Laraib Tariq, Hafiz Muhammad Ali, Luqman Ahmad Nizam, "Vibration Based Gear Fault Diagnosis under Empirical Mode Decomposition and Power Spectrum Density Analysis ", Advances in Science and Technology , Vol. 13, Issue No. 192, 2019. (pp. 0-0)
Muhammad Usman, Shahab Khushnood, Luqman Ahmad Nizam, Waqas Tanveer, Ahmad Shafi, Muhammad Ayub, Hassan Farid Khan, Behzad Rustam,, "Investigation of the Effects of the Incident Flow Angle on Vibration Behavior in Heat Exchanger Tube Bundle ", Advances in Science and Technology Research Journa, Vol. 13, Issue No. 186, 2019. (pp. 0-0)
Muhammad Usman, Shahab Khushnood, Luqman Ahmad Nizam, Muhammad Ayub, Akmal Hafeez, Behzad Rustam, Junaid Muhammad Yousuf, Muhammad Shahid Bashir , "Wear Analysis of Tube-Baffle Vibration Interaction in a Tube Bundle", IEEE Access, Vol. 7, Issue No. 77804, 2019. (pp. 0-0) Category: W
Waqas Aghar; Muhammad Ali Nasir; Faisal Qayyum; Masood Shah; Muhammad Azeem; Saad Nauman, and Shahab Khushnood , "Journal of Mechanical Science and Technology ", nvestigation of Fatigue Crack Growth Rate in CARALL, ARALL and GLARE Fatigue & Fracture of Engineering Materials & Structures, Vol. 33, Issue No. 4217, 2019. (pp. 0-0)
Aakash Ali, Muhammad Ali Nasir, Muhammad Yasir Khalid, Saad Nauman, Khubab Shaker, Shahab Khushnood Khurram Altaf, Muhammad Zeeshan, Azhar Hussain, "Experimental and numerical characterization of mechanical properties of carbon/jute fabric reinforced epoxy hybrid composites", Journal of Mechanical Science and Technology , Vol. 33, Issue No. 4217, 2019. (pp. 0-0)
M. Ammar Akram, M. Nouman Nawaz, Aamir Mehmood, Hafiz Muhammad Ali, Aneela Anum, Shah Akmal, Luqman Ahmad Nizam, Shahab Khushnood, "Experimental Analysis of Tooth Breakage Effect on the Vibration Characteristics of Spur Gears ", Technical Journal , Vol. 23, Issue No. 42, 2018. (pp. 0-0)
Khan, A., Nadeem, A., Khan, J., Atif, M., H.M. Ali, Khushnood, S., Mehmood, T, "Pool Boiling with Nanofluids (A Review)", Journal of Physics and Materials Science , Vol. 1, Issue No. 18, 2018. (pp. 0-0)
Nizam, L. A., Khushnood, S., Farrukh, S. M., Naqvi, A., Bashir, K. S., Bhatti, O. G., Shah, M., & Manzoor, S, "Experimental Study of the Influence of the Surrounding Tube Location and Mass Ratio on the Fluidelastic Instability of Flexibly Mounted Tubes in a Parallel Triangular Tube Bundle", International Journal of Acoustics & Vibration, Vol. 23, Issue No. 534, 2018. (pp. 0-0)
Qureshi, Z. A., Ali, H. M., & Khushnood, S., "Recent advances on thermal conductivity enhancement of phase change materials for energy storage system", A review. International Journal of Heat and Mass Transfer,, Vol. 127, Issue No. 838, 2018. (pp. 0-0)
Qureshi, Z. A., Ali, H. M., & Khushnood, S., "Recent advances on thermal conductivity enhancement of phase change materials for energy storage system", A review. International Journal of Heat and Mass Transfer,, Vol. 127, Issue No. 838, 2018. (pp. 0-0)
Arshad, H., Khushnood, S., Nizam, L. A., Ahsan, M. A., & Bhatti, O. G. , "Effect of Fin Geometry on Flow-Induced Vibration Response of a Finned Tube in a Tube Bundle", Journal of Applied Fluid Mechanics, , Vol. 11, Issue No. 1143, 2018. (pp. 0-0)
Chaudhary, G. Q., Ali, M., Sheikh, N. A., & Khushnood, S, "Integration of solar assisted solid desiccant cooling system with efficient evaporative cooling technique for separate load handling", Applied Thermal Engineering,, Vol. 140, Issue No. 696, 2018. (pp. 0-0)
Usman, H., Ali, H. M., Arshad, A., Ashraf, M. J., Khushnood, S., Janjua, M. M., & Kazi, S. N, "An experimental study of PCM based finned and un-finned heat sinks for passive cooling of electronics", Heat and Mass Transfer, Vol. 54, Issue No. 3587, 2018. (pp. 0-0)
Arshad, A., Ali, H. M., Khushnood, S., & Jabbal, M. , "Experimental investigation of PCM based round pin-fin heat sinks for thermal management of electronics: effect of pin-fin diameter", International Journal of Heat and Mass Transfer,, Vol. 117, Issue No. 861, 2018. (pp. 0-0)
A. Khan, Khushood, S., N. Saqib, I.S. Shahid, "Numerical simulation of vortex induced vibration in heat exchanger tube bundle low Reynolds Number", Journal of Naval Architecture and Marine Engineering, Vol. 14, Issue No. 17, 2017. (pp. 0-0)
Abbas, T., Khushnood, S., Nizam, L. A., & Usman, M. , "Fretting wear analysis of different tube materials used in heat exchanger tube bundle", Advances in Science and Technology Research Journal, Vol. 11, Issue No. 123, 2017. (pp. 0-0)
Asghar, W., Nasir, M. A., Qayyum, F., Shah, M., Azeem, M., Nauman, S., & Khushnood, S, "Investigation of fatigue crack growth rate in CARALL, ARALL and GLARE", Fatigue & Fracture of Engineering Materials & Structures,, Vol. 40, Issue No. 1086, 2017. (pp. 0-0)
Mehmood, S., Shah, M., Pasha, R. A., Khushnood, S., & Sultan, A, "Influence of electric discharge machining on fatigue limit of high strength aluminum alloy under finish machining", Journal of the Chinese Institute of Engineers,, Vol. 40, Issue No. 118, 2017. (pp. 0-0)
Khushnood, S., & Nizam,, "Experimental study on cross-flow induced vibrations in heat exchanger tube bundle", China Ocean Engineering, Vol. 31, Issue No. 91, 2017. (pp. 0-0)
Izhar, A., Qureshi, A. H., & Khushnood, S, "Simulation of vortex-induced vibrations of a cylinder using ANSYS CFX rigid body solver", China Ocean Engineering, Vol. 31, Issue No. 79, 2017. (pp. 0-0)
Mehmood, A., Shah, M., Sheikh, N. A., Qayyum, J. A., & Khushnood, S, "Grain refinement of ASTM A356 aluminum alloy using sloping plate process through gravity die casting", AEJ - Alexandria Engineering Journal , Vol. 55, Issue No. 2431, 2016. (pp. 0-0)
Anjum, Z., Qayyum, F., Khushnood, S., Ahmed, S., & Shah, M. , "Prediction of non-propagating fretting fatigue cracks in Ti6Al4V sheet tested under pin-in-dovetail configuration", Experimentation and numerical simulation. Materials & Design,, Vol. 87, Issue No. 750, 2015. (pp. 0-0)
Sheikh, N. A., Manzoor, S., & Khushnood, S, "A modified non-linear model for high mass ratio square cylinder", Journal of Mechanical Science and Technology, Vol. 28, Issue No. 4989, 2014. (pp. 0-0)
Izhar, A. B., Qureshi, A. H., & Khushnood, S, "Simulation of vortex-induced vibrations of a cylinder using ANSYS CFX", China Ocean Engineering, Vol. 28, Issue No. 541, 2014. (pp. 0-0)
Arooj, S., Shah, M., Sadiq, S., Jaffery, S. H. I., & Khushnood, S, "Effect of Current in the EDM Machining of Aluminum 6061 T6 and its Effect on the Surface Morphology", Arabian Journal for Science and Engineering, Vol. 39, Issue No. 4187, 2014. (pp. 0-0)
Malik, A. H., Khushnood, S., & Shah, A. , "Experimental and numerical study of buoyancy driven flow within a bottom heated vertical concentric cylindrical enclosure", Natural Science,, Vol. 5, Issue No. 771, 2013. (pp. 0-0)
Malik, A. H., Khushnood, S., & Shah, A , "Experimental and numerical study of buoyancy driven flow within a bottom heated vertical concentric cylindrical enclosure", Natural Science, Vol. 5, Issue No. 771, 2013. (pp. 0-0)
Khan, K. M., & Khushnood, S, "Numerical Simulation of Aerospike Nozzle Inviscid Isentropic Flowfield", Life Science Journal, Vol. 10, Issue No. 1340, 2013. (pp. 0-0)
Izhar, A., Qureshi, A. H., & Khushnood, S, "Simulation of fluid structure interaction of heat exchanger tube using ANSYS CFX", Life Science Journal, Vol. 10, Issue No. 2317, 2013. (pp. 0-0)
Naqvi, S. G. H., Masood, S. A., Khushnood, S., Rizwan, A., Jahanzaib, M, "The rollover prediction and prevention of bullet proof vehicle for improved stability", Life Science Journal, Vol. 10, Issue No. 209, 2013. (pp. 0-0)
Siddiq, S., Khushnood, S., Koreshi, Z. U., Shah, M. T., & Qureshi, A. H, "Optimal energy recovery from ammonia synthesis in a solar thermal power plant", Arabian Journal for Science and Engineering,, Vol. 38, Issue No. 2569, 2013. (pp. 0-0)
Khushnood, S., Khan, Z. M., Malik, M. A., Koreshi, Z., Javaid, M.A., Khan, M.A., Qureshi, A. H., Nizam, L. A., Bashir, K. S., Hussain, S. Z, "Cross-Flow-Induced-Vibration in Heat Exchanger Tube Bundles: Book Chapter ", Nuclear Power PlantsPublished by InTech, Vol. 0, Issue No. 0, 2012. (pp. 0-0)
Abbas, H., Khushnood. S, "Fostering R&D Performance using Knowledge Management", African Journal of Business Management, Vol. 6, Issue No. 4386, 2012. (pp. 0-0)
Iqbal, M. J., Sheikh, N. A., Ali, H. M., Khushnood, S., & Arif, M., "Comparison of empirical correlations for the estimation of conjugate heat transfer in a thrust chamber", Life Science Journal, Vol. 9, Issue No. 708, 2012. (pp. 0-0)
Malik, A. H., Alvi, M. S. I., Khushnood, S., Mahfouz, F. M., Ghauri, M. K. K., & Shah, A, "Experimental study of conjugate heat transfer within a bottom heated vertical concentric cylindrical enclosure", International Journal of Heat and Mass Transfer, Vol. 55, Issue No. 1154, 2012. (pp. 0-0)
Khan, M., Levy, C., Hameed, A., Khan, Z., Orakzai, K., Khan, M. & Khushnood, S, "An Analysis of Dome Reversal in Metal Beverage Container Based on Finite Element Methods", Structural Durability & Health Monitoring, Vol. 6, Issue No. 53, 2010. (pp. 0-0)
Khushnood, S., Z. M., Khan, Malik, M. A., Iqbal, Q., Bashir K. S., Khan M. Koreshi Z. U., Khan M. A., Malik T. M., Qureshi A. H., "Modeling and Analysis of Thermal Damping in Heat Exchanger Tube Bundles", Nuclear engineering and design, Vol. 240, Issue No. 1906, 2010. (pp. 0-0)
Younis, Y., Bibi, A., Haque, A. U., & Khushnood, S. , "Vortical flow topology on windward and leeward side of delta wing at supersonic speed", Journal of Applied Fluid Mechanics, Vol. 2, Issue No. 13, 2009. (pp. 0-0)
Sheikh, N. A., Iqbal, Q., Khushnood, S., & Ghaliban, A. E, "Fluid Structure Interaction of Flow Induced Vibration: A study of Laminar and Turbulent flow fields", Journal of Power and Energy Systems, Vol. 2, Issue No. 703, 2008. (pp. 0-0)
Khushnood, S., Khan, Z. M., Malik, M. A., Koreshi, Z. U., & Khan, M. A, "A review of heat exchanger tube bundle vibrations in two-phase cross-flow", Nuclear engineering and design, Vol. 230, Issue No. 233, 2004. (pp. 0-0)
Malik, M. A., Rashid, B., Khushnood, S., & Azim, R. A. , "Modeling and simulation of hydrodynamic lubrication of rotary diesel fuel injection pump", Tribology & Lubrication Technology, Vol. 59, Issue No. 36, 2003. (pp. 0-0)

Conference Publications

Durrani, N., Qin, N., Hameed, H., Khushnood, S, "2D Numerical Analysis of a VAWT wind farm for different Configurations", 49th AIAA Aerospace Science Meeting including the New Horizons Forum and Aerospace Exposition, Florida USA., 2011. (pp. 0-0)
Bashir, K. S., Malik, M.A., Khushnood, S., Khan, M., Iqbal, Q, "Wind Tunnel Testing of a Tube in a Bundle Subjected to Cross Flow Induced Vibrations (ACC0458) ,", Proceedings of 3rd International Conference on Integrity, Reliability and Failure,, Porto, Portugal., 2009. (pp. 1140-0)
Malik, M. A., Raza, S. H., Khushnood, S., Khan, M., , "Analysis of Vibratory Stresses in a Turbine Blade Using Surface Coating,", Proceedings of 3rd International Conference on Integrity, Reliability and Failure,, Porto, Portugal., 2009. (pp. 1161-0)
Khushnood. S., Malik, M. A., Khan, M., Qureshi, A. H., & Bashir, K. S, "On The Optimum Flow- Induced Vibration of A Tube In Heat Exchanger Tube Bundle", Analytical Modeling, Proceeding of 17thInternational Conference on Nuclear Engineering, Brussels, Belgium., 2009. (pp. 0-0)
Malik, A. M., Khushnood, S., Gilani, G., Khan, M., & Khan, M, "Modeling and Simulation of Multi- Stage Autofrettage in Pressure Vessels,", Proceedings of 17th International Conference on Nuclear Engineering , Brussels, Belgium., 2009. (pp. 67-0)
Malik, A. M., Khushnood, S., Khan, M., Gilani, G., & Khan, M, "A Comparative Parametric Study of Single Step and Double Step Swage Autofrettage in Swaged Metal Tubes,", Proceeding of 17th International Conference on Nuclear Engineering, Brussels, Belgium., 2009. (pp. 11-0)
Malik, M. A., Khushnood, S., Khan M., Rashid, B., & Khan, M, "Hydraulic Autofrettage Technology: A Review. ICONE16-48626, ", Proceeding of 16th International Conference on Nuclear Engineering,, Florida USA., 2008. (pp. 195-0)
Khushnood. S., Malik, M. A., Badar, R., Akbar, S., Javed, A., Bashir, K. S., Khan, M, "Failure of Heat Exchanger Tube in Bundle: An Improvement in Design Guidelines, (Oral Presentation), ", Proceedings of 16th International Conference on Nuclear Energy,, Florida USA., 2008. (pp. 0-0)
El-Ghalban, A. R., Iqbal, Q., Khushnood, S., Qureshi, M. A., & Khalil, M. S, "Effect of Temperature on Damping in Shell and Tube Heat Exchangers", Proceedings of 16th International Conference on Nuclear Engineering , Florida USA., 2008. (pp. 71-0)
Iqbal, Q., Khushnood, S., Ghalban, A., Khan, A. R. E., Anwar, M., Khalil, Shahid, M., Qureshi, Arshad, Akbar, Sajjad , "Modeling of Thermal Damping in a Multi-Span Tube Bundle, ICONE15, ", Proceeding of 15th International Conference on Nuclear Engineering, Florida USA., 2007. (pp. 0-0)
Malik, T. N., Ahmad, A., Khushnood, S, "Economic Dispatch Using Genetic Algorithm Based Hybrid Approach", Proceedings of 14th International Conference on Nuclear Engineering,, Florida USA., 2006. (pp. 0-0)
Sheikh, N. A., Malik, M. A., Qureshi, A. H., Khan, M. A., & Khushnood, S, "CFD Analysis of Vortex shedding in a Circular Cylinder", Flow Induced Vibration Design, Proceedings of 14th International Conference on Nuclear Engineering, Florida USA., 2006. (pp. 289-0)
Malik, M. A., Khan, M., Rashid, B., & Khushnood, S, "Analysis of swage autofrettage in metal tube", Proceedings of 14th International Conference on Nuclear Engineering , Florida USA., 2006. (pp. 191-0)
Malik, M. A., Rashid, B., Khan, M. A., Bashir, K. S., & Khushnood, S, "Modeling and Simulation of Cross-Flow Induced Vibrations in Tube Bundles Using Bondgraph Approach", Proceedings of 14th International Conference on Nuclear Engineering, Florida USA., 2006. (pp. 133-0)
Malik, M. A., Rashid, B., & Khushnood, S, "), A Review on Fluid Structure Interaction Modeling Using Bondgraph Method", Proceedings of FEDSM2006 Joint US-European Fluids Engineering Summer Meeting Collocated with the 14th International Conference on Nuclear Engineering, Florid USA, 2006. (pp. 351-0)
Malik, M.A., Rashid, B., Khushnood, S, "Dynamic analysis of fluid flowing through micro pros filters using bondgraph approach", Proceedings of FEDSM2006 Joint U.S., European Fluids Engineering Summer Meeting, Florida USA, 2006. (pp. 0-0)
Khushnood, S., Malik, M. A., Khan, Z. M., Khan, A., Iqbal, Q., Khalil, M. S., Rashid, B., & Hussain, S. Z.,, "Modeling and Analysis of Thermal Damping in Heat Exchanger Tube Bundles,", Preecedings of 14th International Conference on Nuclear Engineering, Pakistan, 2006. (pp. 0-0)
Malik, M. A., Rashid, B., & Khushnood. S, "Non-Linear Dynamic Analysis of Fluid Structure interaction in High Pressure Injection System using Bond Graph Approach", SAE International Technical Papers. Doi, Pakistan, 2005. (pp. 0-0)
Malik, M. A., Khan, M., Lone, S., Khushnood, S, "Analysis of mechanical autofrettage in thick cylinders,", 13th International Conference on Nuclear Engineering, ICONE 13-50413, Beijing, China., 2005. (pp. 0-0)
Malik, M. A., Badar, R., & Khushnood, K, "Cross-flow induced vibration analysis in tube bundles: A Bondgraph Approach", 13th International Conference on Nuclear Engineering, Beijing, China., 2005. (pp. 0-0)
Khushnood, S., Zaffar, M. K., Malik, M. A., Koreshi, Z., Khan, M. A, & Bashir, K. S, "Experiments on flow induced vibrations in a heat exchanger tube bundle", 13th International Conference on Nuclear Engineering, Beijing, China, 2005. (pp. 0-0)
Rashid, B., Malik, M. A., & Khushnood, S, "Scuffing Failure Due to an Abrasive Contaminant and Filter Suitability in High Pressure Injection Fuel System", Proceedings of IMECE 2005 ASME International Mechanical Engineering Congress and Exposition, Florida, USA, 2005. (pp. 37-0)
Rashid, B., Malik, M. A., & Khushnood, S, "Scuffing Failure Due to an Abrasive Contaminant and Filter Suitability in High Pressure Injection Fuel System", Proceedings of IMECE 2005 ASME International Mechanical Engineering Congress and Exposition, Florida, USA, 2005. (pp. 37-0)
Malik, M. A., Rashid, B., Khan, M., & Khushnood, S, "Modeling and simulation of residual stresses in mechanical autofrettage. Proceedings of IMECE 2005 ASME ", International Mechanical Engineering Congress and Exposition, Florida, USA, 2005. (pp. 905-0)
Malik, M. A., Rashid, B., & Khushnood, S, "A Comparative Study of Cross-Flow Induced Vibrations in Heat Exchanger Tube Bundles Using Bond Graph Approach", Proceedings of IMECE 2005 ASME International Mechanical Engineering Congress and Exposition, USA, 2005. (pp. 0-0)
Rashid, B., Khushnood, S., Malik, M. A, "Scuffing Failure Analysis at Hydro-Dynamically Optimized Radial Clearance in High Pressure Injection System", Proceedings of 32nd Leeds-Lyon Symposium on Tribology, France, 2005. (pp. 0-0)
Malik, M. A., Rashid, B., Khushnood, S., & Azim, R. A. , "Surface Roughness Effects on Hydrodynamic Lubrication and Scuffing Failure Analysis of Axially Grooved Plunger of a Rotary Diesel Fuel Injection Pump, ", Proceedings of ASME/STLE 2004 International Joint Tribology Conference, California, USA., 2004. (pp. 849-0)
Khushnood, S., Malik, M. A., Rahid, B., & Azim, R. A, "Experimental and Finite Element Analysis of Hydrodynamic Lubrication of Rotary Diesel Fuel Injection Pump", In Proc 14th Intl Colloquium Tribology., Wilfried J. Bartz., TAE, Ostfildern, Germany, Germany, 2004. (pp. 1015-0)
Malik, M. A., Rashid, B., Khushnood, S., & Azim, R. A, "Analysis of Hydrodynamic Lubrication of Six and Four Grooved Plunger of Rotary Diesel Fuel Injection Pump, ASME/STLE", Proceedings of International Joint Tribology Conference, California, USA, 2004. (pp. 64099-0)
Malik, M. A., Rashid, B., Qasim, S. A., & Khushnood, S, "Modeling and simulation of elastohydrodynamic lubrication of piston skirts considering elastic deformation in the initial engine start-up, In ASME/STLE 2004", International Joint Tribology Conference , USA, 2004. (pp. 0-0)
Malik, M. A., Qasim, S. A., Rashid, B., & Khushnood, S, "Modeling and Simulation of Elastohydrodynamic Lubrication of Piston Skirts Considering Elastic Deformations in the initial Engine Startup", In ASME/STLE International Joint Tribology Conference , USA, 2004. (pp. 0-0)
Malik, M. A., Sayyed, B. H., & Khushnood. S, "Numerical & Experimental Analysis of Linear Elastic Fracture Mechanics", Proceedings of 12th International Conference on Nuclear Engineering, Virginia, USA, 2004. (pp. 0-0)
Badar Rashid, 2004, M. Afzaal Malik, and Khushnood. S, "Analysis of Surface Roughness Effects on Hydrodynamic Lubrication of Axially Grooved Plunger of Rotary Diesel Fuel Injection Pump", Proceedings of HSC 2004", Huntsville Simulation Conference, Huntsville, USA, 2004. (pp. 0-0)
Khushnood. S, Khan, Z. M., Malik, M. A., Koreshi, Z., & Khan, M. A, "Modelling and Simulation of Cross-Flow Induced Vibration in a Multi-Span Tube Bundle", Proceedings of 12th International Conference on Nuclear Engineering, Virginia, USA, 2004. (pp. 0-0)
Malik, M. A., Rashid, B., Khushnood, S., & Azim, R. A. , "Modeling and simulation of hydrodynamic lubrication of rotary diesel fuel injection pump", Proceeding of STLE/ASME Joint International Tribology Conference, 2003TRIB-014, Ponte Vedra Beach, Florida USA, 2003. (pp. 0-0)
Khushnood, S., Khan, Z. M., Malik, M. A., Koreshi, Z., & Khan, M. A., "Modeling fluid forces and response of a tube bundle in cross-flow induced vibrations", 11th International Conference on Nuclear Engineering, Tokyo, Japan, 2003. (pp. 11-0)
Malik, M. A., & Khushnood, S, "A review of swage-autofrettage process", In Proceedings of the 11th International Conference on Nuclear Engineering, Tokyo, Japan, 2003. (pp. 20-0)
Khushnood, S., Khan, Z. M., Malik, M. A., Koreshi, Z. U., & Khan, M. A, "A Review of Heat Exchanger Tube Bundle Vibrations in Two-Phase Cross-Flow", Proceedings of 11th International Conference on Nuclear Engineering., Pakistan, 2003. (pp. 11-0)
Khushnood, S., Khan, Z. M., Malik, M. A., Koreshi, Z., & Khan, M. A., "Cross-flow induced vibrations in tube bundles: a review", 11st International Conference on Nuclear Engineering, Tokyo Japan, 2003. (pp. 11-0)
Malik, M. A., Khushnood, S., & Vaqar, A. , "Modeling and simulation of time-dependent autofrettage for a thick-walled cylinder", In Proceedings of 4th International Conference on Mechanics and Materials in Design, Nagoya, Japan, 2002. (pp. 0-0)
Khushnood, S., Khan, Z. M., Malik, M. A., Koreshi, Z. U., & Khan, M. A., "Vibration Analysis of a Multispan Tube in a Bundle. In 10th International Conference on Nuclear Engineering ", American Society of Mechanical Engineers, pakistan, 2002. (pp. 563-0)
Subhani, N. A., Khushnood, S. S., & Ullah, Z, "HSE Management Regulatory Aspect: International/National/Local. In SPE International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production", Society of Petroleum Engineers , Pakistan, 2000. (pp. 61276-0)
Ullah, Z., Khushnood, S. S., & Subhani, N. A. , "HSE Management: Accident/Incident Investigation. In SPE International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production", Society of Petroleum Engineer, Pakistan, 2000. (pp. 61278-0)

Books

N/A, 0

Book Chapters

N/A, 0